SOVOL SV01 E3D Hemera Mount.

This is the combo I use for the E3D Hemera extruder on the SOVOL SV01. I still have some upgrades to do : Filament…
2
29
0
195
updated August 22, 2023

Description

PDF

This is the combo I use for the E3D Hemera extruder on the SOVOL SV01.

I still have some upgrades to do :

  • Filament sensor mount
  • Cable holder on the X motor mount cover.

/!\ This combo includes Tarasque1024's Hemera_5015_Fan_Mount_45deg_V4.stl https://www.thingiverse.com/thing:4039235 which works perfectly.

/!\ This combo includes my X Motor Cover from my SOVOL SV01 Savior's Kit. https://www.thingiverse.com/thing:4730352 which allows to maximize X travel to +300mm

The design try to minimize the amount of work on the genuine carriage: it mostly uses the holes already drilled into SOVOL's blue carriage. There's only one hole to drill (M3). As I tried to save the same Z-height and same Firmware configuration*, and minimize the holes to be drilled, you'll have to dismount the carriage to fix the hemera from the back of the carriage.

Firmware changes :

  • X travel 300mm
  • Esteps 376mm (eventually to be adjusted)

Recommended material :

PLA (for Motor and cable cover)

PETG/ASA/ABS for other parts.

Q&A

Which parts differs from the genuine SV01 ones ?

  • E3D Hemera
  • 5015 fan (find another fan mount if your 2040 fan is still alive)
  • Some screws (BOM to come...)

2022/02/02 UPGRADE to another rugged fan duct designed by me.

Category: 3D Printing

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License