Box UT-320 Series Thermometer

This Box for UT320 Series is created for optimised size and printability.

The Base and Lid are printed with PLA (in my case PLA+ from eSun) the Hinge and Clip are printed with PETG (in my case PETG from eSun)

You need 8 Screws ISO 7380 M3x30 (or similar M3x30)

I ordered my screws from : 

https://www.schraubenking.ch/M3-x-30mm-Linsenflachkopfschraube-ISK-Edelstahl-A2-ISO7380-P009290

My Printer was Bambulab X1 Carbon with an AMS

Printed without any Support (see pictures below…)

Nozzle Size : 0.4mm

Bottom View ….