Blue Yeti Nano Boom Mount MK1

I didn't like how my Blue Yeti Nano mic attached to my microphone boom. It made the Yeti Nano very tall, which made it difficult to use my mouse and keyboard underneath the boom and mic, while keeping the microphone off-camera. I also wanted to be able to tilt the microphone back a few degrees, so it would point at my face.

This small printed part solves both of those problems. It shortens the height of the microphone by removing the various metal adapters, and allows the microphone to be tilted.

It reuses the thumbscrews that come with your Blue Yeti Nano's desk stand, and it works with an InnoGear Microphone Arm, which has a 5/8" threaded mount.

Note: This is an older design! I've created the Blue Yeti Nano Boom Mount MK2, which includes separate lower and upper nuts that capture the microphone, but allow it to rotate separately from the threads.

Print instructions

I recommend printing this with PETG with 25 percent gyroid infill.