Vaccine vial holder - (Pfizer BioNTech / Moderna / AstraZeneca)

Vaccine Vial Holder for PfizerBioNTech vials based on model created by: Ales Padrta and Zapadoceska Univerzita for hospital in Rokycany (https://rokycansky.denik.cz/zpravy_region/rokycanska-nemocnice-vyresila-problem-s-nestabilni-vakcinu-ma-drzaky-z-20210121.html https://www.thingiverse.com/thing:4730597)

15.2.2021 - Added Vial Holder for Moderna and AstraZeneca vaccines, this holder can be used for both brands.

INTEDED USE: in normal refrigerator, NOT in freezer with extremely negative temperature.

I had problems printing the original model because of fillets used in corners. As this is a relativlely short path i decidet to try to brigde that.
Beside that i tried to optimalize the model for 0.3 layer height and extrusion width settings in default 0.3 layer Draft profile from PrusaSlicer for 2 lines.

Thanks to that the print time went down from approx 1h 33m to aprox. 55 minutes for single item.

Print instructions

Layer: 0.3mm
Default Extrusion width: 0.5mm
First layer: 0.42mm
Perimeters: 0.5mm
External perimeters: 0.6mm
Infill: 0.5mm
Solid infill: 0.5mm
Top solid infill: 0.42mm

No supports
Infil: Doesn't matter