under desk cable holder/collector - heavy duty

strong cable holder for many thick and heavy cables at once - to be mounted under a desk. the actual room for the cables to sit in is 5,5 x 2 cm - that should fit some real thick cables easily. 4 screws for the win. with infill 15 to 20% and gyroid pattern (prusa slicer) you get a very strong model, that barely flexes. if you are in a hurry and up for adventures: ~ 1 hour and ~ 63 grams of filament in mordor mode with a 1,4 nozzle.

remix and edit everything yourself in tinkercad, if you need.

Notes:

• you should prefer the version with the rounded edges to protect your cables.
• design is optimized for 4x16 wood screws. you can adjust the hole design in my remix-link to suit your screw size
• i went mordor with my big 1.4 nozzle - which drastically reduces printing time (half on the mk3, not sure, what the mk4 could achieve). the result is ugly and needs some simple and very quick postprocessing (prodtrudings, stringing), but does hardly flex and is super strong.