EVA 2.4 Hotend Mount Standard MK8 Hotend

Hi this is a Hotend Mount for the Eva 2.4 Toolhead system. I did improved it for the Mercury one ZeroG project.
12
123
0
824
updated August 20, 2023

Description

PDF

Hi this is a modifyed version of the MK8 Hotend Mod. This mod sets the Hotend higher for better Cooling duct support on the Eva 2.4, heatset inserts instead of nuts and gives the opportunity to use more standard parts from the original ender 5.
I did remove the mounts for bl-touch/cr-touch or probes. It will work best with the klicky-mod from @Turtlecrawler [2.1.49 2.1.81] and is way more cheaper than a bl-touch/cr-touch. 
Also i did modify the ziptie holder its now 1.2mm thicker. 
The rest of the eva 2.4 parts can be downloaded from the ZeroG website.

Files | ZeroG Documentation

The hotend shown is the supported one color may be different. The microswiss mk8 hotend is not supported!

Print with organic/tree supports

Version 6 at the moment….

Tags



Model origin

The author remixed this model.

License