Shower Basket/Shelf (easy print, no supports)

I needed a shelf for my shower and searched in stores, but couldn’t find anything that didn’t require drilling. I know there are suction cup solutions, but honestly, they don’t work well on most tiles. So, I thought about it a little and came up with this solution.

I used M5 bolts, but M4 would work as well, and it’s strong enough to hold items without any problems. It’s been working flawlessly for 6 months. I used Prusa PLA marble for printing, and it looks amazing.

A little tip: print the walls with at least 4 perimeters and with PETG material. You need to cut 2 parts in half, and print 1 at the time and rotate it diagonal to fit on MK3. But if you're a PLA fan, that works too! The shelf attaches to a pipe with a diameter of 21-22cm. Use M4/M5 threaded bolts. No washer needed. And if your pipe is of a different size, let me know. Maybe I have something special in store for you!