Print Settings:
- Material: PLA+
- Layer height: 0.2mm
- Layer width: 0.4mm
- Wall thickness: 1.2mm
- Infill
- Density: 20%
- Line distance: 2mm
- Pattern: Concentric
- Line multiplier: 1
- Printing temperature: 200°C
- Build plate temperature: 60°C
- Infill speed: 50mm/s
- Wall speed: 30mm/s
- No supports
- Build plate adhesion:
- Type: Brim
- Width: 1mm
- Line count: 3
- Brim only on outside
Tags
The author marked this model as their own original creation.