Gothic Chandlier

Print all parts for your gothic chandlier: five of the chandlier segments, one center piece,  one center piece top, and five of the decorative coins.  Four different sizes are included for the main segments to accommodate various printers. Screw all together with M3 and M4 screws.  Paint as desired or if you want a wrought iron look like in the photos: paint with flat black primer and let dry. Then using a sponge or paper towel wipe silver or stainles steel paint onto the edges and high points of the chandlier.  If you get the silver where you dont want it, wait until dry then fix with the flat black primer using towel/sponge method. Hang chandlier base from the center piece rungs with five chains of about 15 inches each. 3-inch carbiner clips can be used to fit over the rungs or you can open  the chain links and bend back to enclose the rungs.  Install battery operated candles in the sconces and turn on.