Ender 5 Plus Hot Bed Cable Support

This is a cable support bracket for the hot bed cable on an Creality Ender 5 PLUS.

Parts:

2 - M4 Nuts
2 - M4x25 Socket Head Cap Screw

I used the suggested printer settings of  0.4mm nozzle, 0.2 layer, 3 walls, 4 top/bottom shell, 15% Rectilinear infill.

2/10/2020
V2, Same as original except closed in extra holes. Push cable tie in the top on side of bed cable and it will follow path and come out on other side of cable. Then pull tight.

Original Upload - 12/25/2019

#For the latest on this project and others, join my group:#
https://www.facebook.com/groups/3DPrinterModding/

All Tips go back into the projects to be able to support more hardware.
Thank you