Primer filler for Dillon primer pickup tubes

Designed to fill Dillon primer tubes with primers, both small and large.
This is a multipart model, print files are provided merely as sample, as modifications of print conditions on user side are assumed.
Important notes:

1. Device functionality and reliability fully depends on drop holes precision - in Body_1 and both Drop parts! This can be tricky and annoying to achieve with 3D print, as both printer and material introduce deviations.
2. Electric equipment used:
   Motor RE-260RA, for example:
   https://www.aliexpress.com/item/4001218364427.html
   Speed PWM controller PWM 5V-30V DC 5A, for example:
   https://www.aliexpress.com/item/33018272548.html
   9V Battery Snap Connector, for example:
   https://www.aliexpress.com/item/32874851624.html
3. Other components:
   M3x12 Hex socket bolts
   3mm plexi glass

Print instructions

For Body and cover parts use Brim to eliminate warping.
Otherwise no specific requirements, printable from PLA and/or PETG - your choice.