TRABAJO EN PROGRESO / WORK IN PROGRESS
Aun no pude imprimirlo con lo cual no tengo una físico para mostrar, pero parecen estar todos bien y no dan errores al testearlos con distintas apps.
Este diseño permite generar medallones para llavero o similar con el logo de la manada y un nombre.
Fue inspirado por un pedido de un viejo lobo de otra manada y le doy las gracias por la idea.
Tiene una serie de Parámetros para configurar :
Como dije es un trabajo en progreso y la nueva version tiene varios cambios que despues documentare
en todos los casos los grados se toman en el sentido de las agujas del reloj, donde el cero son las 12, las 3 serian 90 grados, las 6 180, las 9 270.
NOTA: Tengan en cuidado al seleccionar el tipo de letra y el logo cuando realicen Calados, si queda un segmento desconectado de los demás (por ejemplo el centro de la letra O) el mismo quedara en la cama de impresión al sacar el trabajo, incluso puede despegarse al imprimir y generar problemas en la impresión.
Para la tipografía estoy usado una llamada STENCIL que viene por default en la mayoria de los sistemas operativos y puede descargarse libremente en los que no esta.
Para impresión sobre el llavero no hay problema, pero para calado si.
Para que no tengan que trabajar innecesariamente, estoy incluyendo un monton de llaveros, en 4 versiones cada uno
a) logo calado y nombre calado (nombre.STL)
b) logo impreso y nombre calado (nombre_RLOGO.STL)
c) logo impreso y nombre impreso (nombre_RLOGO_RTEXTO.STL)
d) logo calado y nombre impreso (nombre_RTEXTO.STL)
Si querés hacer alguna sugerencia mandame un email o mensajeame.
This designs allows to create keychains or similar with the Scout cubs logo and a text.
It was inspired by an Akela from a different scout group and I thanks her for the neat idea.
Has a Few Parameters that can be configured to customize it to your needs:
in all cases, the angles a measured clockwise, with o being 12 on the clock, 3 on the clock would be 90 degrees, 6 would be 180 degrees, and 9 would be 270, and so on.
As mentioned, this is a work in progreess, expect changes and some parameters not documented here but explained in the customizer.
NOTE: be careful when selecting font type and logos for cut-outs, as there might be some orphans objects as a result (like the center of the character O), this objects will be unconnected to the rest of the object and left behind when removed from the printing bed
( or worse they might become loose during printing and damage the rest of the print).
for the cut-out images I've used a font called STENCIL, readily available in most OS and easy to install if missing (it's free).
this is NOT an issue when you select to print the test/logo, is only when you opt for cut-outs
To save you some work, I'm including a bunch of keychains with 4 versions each
a) cut-out logo & cut-out name (name.STL)
b) raised logo & cut-out name (name_RLOGO.STL)
c) raised logo & raised name impreso (name_RLOGO_RTEXT.STL)
d) cut-out logo & raised name (name_RTEXT.STL)
If you have any suggestions feel free to emails me o chat.
I was inspired by a request, could not sleep so I started playing with openscad until I got what I wanted.
Category: KeychainsThe author marked this model as their own original creation. Imported from Thingiverse.