Adjustable endstop for Z-axis on ShenzenTech Printer

A small modification to add an adjustable Z-Endstop to my ShenzenTech Printer.

Print instructions

Category: 3D Printer Parts Summary

A small modification to add an adjustable Z-Endstop to my ShenzenTech Printer.

Print Settings

Printer:

Prusa i3 China Derivated

Rafts:

Doesn't Matter

Doesn't Matter

Resolution:

0.2

40%

Post-Printing

Requirement

Adjustment:
Every holes may need to be drill a little (While designing it I had considered it was best too tight than too loose)

Parts needed:

• 2x longer 3mm screw for the fixation to the X-carriage
  (for the original ShenzenTech X-carriage 22mm is OK)
• 1x 5mm screw for the adjustment screw.

  How I Designed This

UPDATEs:

v1.4: Little positioning adjustment of the holes used to fix the support to the printer.
v1.3: Better functional dimensioning to match the original ShenzenTech parts.
(Having replace one part I was able to do fine measuring)
v1.2: Adjustment of the endstop positioning vs motor's axis