Z-axis-support for ShenzenTech Printer

The original design of Z-Axis supports for my Prusa i3 derivated Printer from ShenzenTech.
I made those because i wanted to modify it a little to use models made for standard prusa i3 x carriage (http://www.thingiverse.com/thing:1607001)

Print instructions

Category: 3D Printer Parts Summary

The original design of Z-Axis supports for my Prusa i3 derivated Printer from ShenzenTech.
I made those because i wanted to modify it a little to use models made for standard prusa i3 x carriage (http://www.thingiverse.com/thing:1607001)

Print Settings

Printer:

Prusa i3 China Derivated

Rafts:

Doesn't Matter

**Supports:** No

Resolution:

0.2

**Infill:** 30 Post-Printing ============= **Adjustment**

Every holes may need to be drill a little.
(While designing it I had considered it was best too tight than too loose) How I Designed This =================== **UPDATEs:**

v1.3: Little positioning adjustment of the holes used to fix the support to the printer.
v1.2: Again: some adjustment of dimensions (Having replace one part I was able to do fine measuring) v1.1: Better functional dimensioning to match the original ShenzenTech parts.