Gridfinity Refined Plate-to-Plate with tighter tolerances

Gridfinity Refined Plate-to-Plate with tighter tolerances

Default tolerance was 2*1.2mm, current is 2*0.1mm, distance to next plate has 0mm offset since it has enough room to move around a little.
Plate is being also lowered by 0.4mm to make room for main plate sagging while bridging or other imperfection if printing with bigger nozzle.

Test with ABS
Print instruction:
To get nice fast printing with out any glitches
Layer: 0.2 Quality
Top and Bottom layer: 0
Parameter: 7
InfIll: 0%

If you want it to be closed go with
Top and Bottom layer: 3
infill: 15%
ironing: enabled