Large Low-Poly Pumpkin

This is the large version of my low-poly pumpkin model. It makes great decor for Halloween and Fall Lovers. It has a cavity and hole in the rear to allow the addition of lights to turn the pumpkin into a proper Jack-O-Lantern.
-Note this pumpkin comes in multiple versions. 
-One where you can print the main pumpkin in vase mode at the same time and filament (at the cost of rigidity). This version of the model will have a cylinder shape in the back due to the slicing of vase mode and can be cut off later.
-One where the pumpkin is printed like a normal model
-And there are also two versions of the lid one with the stem attached and one where it fits into place as a second print. This is for anyone who want to make their pumpkin with a brown stem but lacks ams.

-If you want access to my Member exclusive discord and email list, you can also go and support me on Thangs, with all of the perks of my club here on printables and more, including my entire library of free and premium models: https://thangs.com/designer/RWB%20Designs

Print Settings:

Vase mode enabled if you use the appropriate pumpkin model
For all:
.1 - .2mm layerheight 
supports enabled only for the lip on the lid of the pumpkin not the stem or body