Standalone Drybox Remix, Threaded PTFE Connector Opening, Without Humidity Sensor Opening

I have a humid basement so I remixed this model to only have 1 small opening for the PTFE Tube connector. That opening is threaded so you can screw the connector directly into the drybox!

I used the Prusa Mini+ Spool Holder parts and shortened the rails (file included) to fit. I placed a humidity sensor inside to test with Desiccant packs and after several hours the humidity dropped to levels I am very happy with.

The same build instructions apply to this one.

Amazon (Paid) Links:
PTFE Tube Threaded Connector: https://amzn.to/47F0HWs
PTFE Tube: https://amzn.to/3QDafvc
Bearings 608 ZZ (For Mini+ Spool Holder): https://amzn.to/3KGCXHx
M3x5mm Screws: https://amzn.to/45c5Tja
M3x30mm Screws: https://amzn.to/3YCuISQ
M3x10mm Screws: https://amzn.to/45sm23q
Humidity Sensor (I placed inside): https://amzn.to/3s9MMYa
Desiccant Packets (2x inside works): https://amzn.to/44bk7iN
Magnets for PTFE Connector: https://amzn.to/3OIteSB

Model Links:
PTFE Connector: https://www.printables.com/model/32368-join-ptfe-tubes-together-magnetically
MINI+ Spool Holder: https://www.printables.com/model/57214-mini-printable-parts/files
— I glued the spool holder parts together so I did not need to buy extra parts.

As an Amazon Associate I earn from qualifying purchases.