snail, slug trap - fast print (vase mode)

snail, slug trap - fast print (vase mode)

You need a glass or PET bottle to add to the printed parts

Both the jar and the PET bottle should be smaller in diameter than the width of the rib

The bottom part of the ribs is used for attachment - shorten it as needed and bend it to hold the trap on the bottle

Print the upper part using vase mode

Ribs using normal printing

Print Settings

Rafts:

Doesn't Matter

Supports:

Post-Printing

shorten as required

bend as required

Build

add a roof

put on the bottle

bury the bottle - leave the rim of the bottle about 1 cm above the ground, pour the beer