After making the Complete Clean Look (a remix of the Lite Enclosure) I wanted a clean and low profile side spool holder and PTFE guide. I found the excellent model from Nirin and adapted it to fit the new side pieces of the P1P. The spool holder was also made a bit thicker to sit alongside the P1P to give it a bit more of a cleaner look.
Printing is very simple with supports needed for the PTFE guide. The side spool holder was printed with 8 walls and 50% infill. Maybe a little overkill but at least it's nice and meaty!
The Bambu spool holder can be attached the normal way or upside down with the Spool Roller Modification from suit.
Please see the photos to see how the holder is attached. You will need to screw the Bambu holder in first, before attaching it to your P1P.
BOM:
Spool Holder
Bolts
M3 x 18
M3 x 10 x2 For attaching at the rear
M3 x 12 x2 For the Bambu spool holder
M3 Nuts x3
PTFE Guide
M3 x 12 x3
When attaching at the side, you will need an M3 Tapping bit.
This will fit a P1P without the Clean Look pieces but you will have gaps!
Earn your Prusameters and post your makes!
The author remixed this model.