T3PA Brake Mod - Easy version

After looking for a way to upgrade my T3PA, and lack of options, i ended up remixing Charlie's design.

Easier to use / install, it's meant to be the easiest way to do a brake mod on the pedals.

To use with 120+mm RC shocks, mines are from AliExpress.

Exist in 2 versions : 1 shock and 2 shocks, to use depending on feeling / budget / use.

Each version can be used on any pedal !

(intended to use 1 shock on clutch and gas pedal, and 2 shocks on brake)

Hardware needed :

2 countersunk M6*30

2 M6 nuts

1 countersunk M5*45

1 M nut

No screws needed for the shocks themselves, just slide them into place and they won't move.

Pictures to come soon !

BE AWARE ! Installing this mod will reduce pedal travel (for 120mm shocks at least, didn't try longer ones).

Print Settings

Rafts:

No

Supports:

No

Resolution:

200

Infill:

20

Filament: PolyMaker PLA

Category: Hobby