HSW hexagonal baskets v2 with full bottom

This model is similar as HSW hexagonal baskets v2, but it has full bottom. It is great for pencil holders.

The walls of the basket are perforated with the same dimensions as the HSW basket. The walls are 4mm thick, except the back wall. It has the same thickness as the HSW. The inserts fit into it.

Procedure for fixing the basket to the HSW:

1. print the inserts for the hsw, choose the shape according to your needs
2. print out hexagonal stakes for connecting the inserts on the basket and the inserts on the HSW. There are 2 types with different tolerances. The standard one fits perfectly into the inserter, if you will be attaching the basket with only one pin I recommend printing a larger version. If you will be attaching multiple pins I recommend printing the smaller version for tolerance.
3. insert the pins into the insert. You may need to use force (mallet or small hammer).
4. insert the inserts into the back of the basket
5. insert the basket with the inserts into the HWS at the desired location

A combination of all possible sizes (basket height and basket base radius) is available.

Tip: the perforation of the basket is the same as HSW, it fits inserts on which it is possible to hang other accessories (hooks, small baskets, etc.).

If you want to support me, please buy me some filament.