Bane Bust (pre-supported)

Printing instructions

General information

Bane comes in two pieces that are printed separately. One base part and one main bust part.

The heights at different scales are as follows:

FDM printing

• This guy should be able to be printed without supports on most FDM printers that have decent overhang capabilities.
• Make sure you don’t scale the bust way too small or the tubes might be too difficult to print.

Resin printing

Photo by Charro Zuck.

The resin download comes with pre-supported and test printed files (by the very skilled professional resin support Jedii and photographer Charro Zuck) for small sized printers (like the Mars 2) and medium sized printers (Saturn, Mono X). It comes in two formats:

1. Lychee Slicer Lite (.lyt) files, that you can edit the supports yourself in if you feel you want to make any changes before printing (this is the recommend way), and
2. Pre-supported and pre-hollowed .stl files. I don’t recommend these because if you use anti-aliasing you’ll be applying it to the supports as well, which makes the connecting area much less sturdy and increases the chance of print failure.

There’s of course also the regular STL files there if you want to do all the slicing yourself, or print at a much larger size using something like the Phrozen Sonic Mega 8K.