Bo-Katan Kryze Bust (pre-supported)

Printing information

General

This sculpt comes in two main versions. One without a helmet on, and one without, as shown in the image above.

If you choose the one without helmet you only have to print the bust part and the base part.

If you choose the helmet version, you need to print the helmet and the little aim piece separately and assemble them afterwards (the resin version has the jetpack as a separate piece as well).

There’s the usual concave and convex eyes that you can choose between. The files are marked accordingly, as shown in the image below.

FDM

All the parts should be able to be printed without supports on an FDM printer :)

The helmet version has the helmet and aim sigh printed separately and assembled as shown below.

Resin

Due to the XY space on a resin printer usually being more limited I have separated the jetpack, and this part needs to be printed separately, and assembled as shown below.

The resin download comes with pre-supported files for small sized printers (like the Mars) and medium sized printers (Saturn, Mono X). It comes in two formats:

1. Lychee Slicer Lite (.lyt) files, that you can edit the supports yourself in if you feel you want to make any changes before printing (this is the recommend way), and
2. Pre-supported and pre-hollowed .stl files. I don’t recommend these because if you use anti-aliasing you’ll be applying it to the supports as well, which makes the connecting area much less sturdy and increases the chance of print failure.

There’s of course also the regular STL files there if you want to do all the slicing yourself, or print at a much larger size using something like the Phrozen Sonic Mega 8K.