Game of Thrones' King's Hand Bookmark

UPDATE: I made a v3 which is a variation of the short version, that is more practical as a bookmark.
 

---
Bookmark created from the Hand of the King brooch made by HasiGH on Thingiverse (thing:630577)

There was similar bookmark on Thingiverse, but the execution was poor, so I created a new one myself in Fusion360.

There are 2 versions, long (18.6 cm) and short (16.1 cm)

(Photo is of v1 which has slightly longer gaps)

Print instructions

Printed mine with a color change at layer, where the knife pattern starts (Z>0.8mm).

Layer Height: 0.1mm
Material: PETG
Supports: No

Notes:

Use the "Thin Walls" setting when slicing for better resolution on the rim pattern.

If using PLA could probably use an even smaller layer height for better resolution on the hand. I chose PETG since it is much less brittle than PLA and is less likely to break for such a thin object.