Bambu Lab Magnetic (Or standing) Waste Bin

8/25 Update:

Larger version for AMS prints added

Large Version doesn't need magnets, the bucket can just be placed behind the printer.

Hardware:
Uses (2) 25mm x 3mm x 4mm magnets

https://www.amazon.com/Keukenket-Neodymium-Magnets-25x4x3mm-Rectangle/dp/B0BFGQBXLN/ref=sr_1_3?crid=2HL0GBVCJ26DV&keywords=25x3x4%2Bmagnet&qid=1692224395&sprefix=25x3x4%2Bmagnet%2Caps%2C117&sr=8-3&th=1

After months of sleepless nights and countless reiterations, I'm proud to bring you the Non-Official Magnetic Bambu Lab Purge Bin. It contains a myriad of features, including but not limited to a nominal width bucket to catch all purges for many prints so you're printing more and cleaning less! The “Jesus Catch” rear area (it is risen) to assure no spillage from rogue purges, and our engineers developed a breakthrough in technology with a specialized thin ramp to guide waste into the bin much easier than any of the competition.

It's these features and attention to detail that I believe will help guide our team to the top of the pop charts, and I strongly believe with your support and feedback we're on our way there!

Special thanks to:

The Garage's very own:
Arson Gaming

French&Sterling brand KittenNip™
 

Reviews:
"…It's one of the greatest magnetic waste bins ever designed OF ALL Time
THE CHIBESE ALRADY COPIED IT
MY PEOPLE, LOTS of ppl are telling me the Russians have bought it off the Chinese too"

-DJT