Evangelion WILLE Logo (Rebuild)

The Evangelion WILLE logo, sized for a mouse pad or sign for display. Separate magnetic version and CAD file included.
10
31
0
254
updated December 1, 2023

Description

PDF

This is an Evangelion WILLE logo in various formats:

  • A 1mm variant with or without a border for sticking to things with double sided tape or other sticky substances or for possible use as a mouse pad/mat with less reflective plastics.
  • A 3mm thick variant with a border, which supports 6x2mm and/or 5x2mm disc magnets so it can be attached easily to metallic things.
  • Supplied in CAD friendly STEP & Shapr3D formats as a re-usable CAD asset.

If you would like to view the 3D model in colour in your browser and with optional AR, this is available directly at the Shapr3D viewer here.

I have also included all the CAD assets for you to make wonderful things as I am a big fan.

新世紀エヴァンゲリオン

Printing

Please use a 0.2 layer height, especially for the magnetic sign version which is designed to have 3 full layers (i.e. 0.6mm thick) on the side where the logo is.

There are pre-coloured versions of the models available for Bambu printer users in the files area. I have used settings to ensure there are no holes, which was used to produce the above model in PLA.

Magnets

On the reverse side in its normal orientation, the holes directly at the top, bottom, left and right are sized for 5x2mm disc magnets. The other ones are for 6x2mm magnets.

For safety purposes I put a small amount of glue on a magnet before insertion. As the gap is tight to accommodate optionally using no glue, the easiest way to do this is to put the magnet on the back of a metal spoon, dab the glue, carefully align the magnets over the holes and apply pressure. It should pop right in.

Versions

2023.09.30: Based on feedback, added variant with a border around the outside and a separate model that supports magnets.

2023.08.16: Initial upload.

Tags



Model origin

The author marked this model as their own original creation.

License