Tjusig Adapter

IKEA's Tjusig shoe rack comes in two sizes. With these parts, a smaller Tjusig can be placed on a larger one. You need one adapter and two joiners.

The set contains all pieces. They need to be glued together after printing.

The dimensions of the adapter are not perfect, it is maybe a millimeter or so lower than it should be - still good enough for us! This can be fixed in the Openscad-files.

Print instructions

In the set, all parts are cut so that they can be printed without support. They must be glued together afterwards.

The adapter is wider than the Mk3s and must be cut and printed in two pieces.

The joiner that links Tjusig-feet together can probably be printed in one piece with support. We only tested prints that were cut and glued together afterwards.