Moon Knight Bust (pre-supported)

Printing guidelines

For the resin slingers out there I've gone through the work of pre-supporting it all for small (e.g. Elegoo Mars) and a medium (e.g. Elego Saturn) sized printers. There's pre-supported hollow STL files, as well as Lychee Slicer Lite files. I recommend these, because I'm not the greatest at supports, so you might want to go in and make some tweaks yourself! To make it easier for you I have tagged all the supports so you can easily pick the perimeter, bottom, and internal ones.

The FDM crowd will have to support them as shown in the two pictures below, depending on which variant you will print (if your printer has great bed adhesion you probably don't need the back supports on variant 2).