D&D 5e Spell Slot Tracker and Dice Vaults - Class Specific

These are class specific spell slot trackers and Dice vaults for Dungeons and Dragons 5e.

Two versions are currently available Standard Caster, and Warlock. Both feature tokens for tracking spell slot usage, space for storing dice, and a screw-on lid that doubles as a dice tray.

The Standard version works for the Wizard, Bard, Cleric, Sorcerer, and Druid Classes.

An alternative tracker is available for Warlocks.

Print instructions

Parts needed for Each Tracker

Standard Tracker

• Standard Tracker Base
• Standard Tracker Lid
• Slot Token 1 (4X)
• Slot Token 2 (3X)
• Slot Token 3 (3X)
• Slot Token 4 (3X)
• Slot Token 5 (3X)
• Slot Token 6 (2X)
• Slot Token 7 (2X)
• Slot Token 8 (1X)
• Slot Token 9 (1X)
  ## Warlock Tracker
  • Warlock Tracker Base
  • Warlock Tracker Lid
  • Slot Tokens 1 through 9 (1 of each)
  • Warlock Token (4X)

Print Instructions

General Settings

Layer Height: 0.2mm
Supports: None
Bridging Perimeters: On
Infill: 10-20%
Recommended Material: PLA

Tracker Base

Both bases should be printed with the large face (at the bottom of the base) on the print bed.

Tracker Lid

Both lids should be printed with the top of the lid on the print bed with bridging perimeters turned on.

Tokens

All tokens should be printed flat on the bed with bridging perimeters turned on.

Multicolor printing

Multicolor prints can be made using filament changes at the following layers. ONLY applicable for prints that use 0.2 mm layer height. Layer numbers are for PRUSA slicer

Standard Tracker Lid Inlay: Place filament change at layer 2.
Standard Tracker Base Numbers: Place filament change at layer 71
Warlock Tracker Lid Inlay: Place filament change at layer 3.
Warlock Tracker Lid Inlay: Place filament change at layer 71.

Usage Instructions

Standard Tracker

The standard tracker has slots and tokens for the spell slots of the Druid, Sorcerer, Wizard, Bard, and Cleric classes for levels 1-20. When a slot is used the token can be dropped in the cup at the center of the tracker.

Warlock Tracker

The warlock tracker has an inset where a spell slot token can be placed in order to indicate the current level of the warlocks spell slots. Each warlock token, up to 4, has the same level that is indicated by this spell slot token. At high enough levels Warlocks also gain access to Mystic Arcanum (6th through 9th level spells) at high enough levels. Slots and tokens are provided to track the usage of these as well.