RC Benchy Tugboat with drone Motors

Video on Youtube: https://youtu.be/mgOHi9M1HmE

Code to control the boat with two esp8266: https://github.com/lusengineering/Benchy-tugboat

Parts List: (Not affiliate links because i dont know how tu use them)

Motor: Racerstar 2207 (1600KV Version): https://de.banggood.com/Racerstar-2207-BR2207S-Fire-Edition-1600KV-2200KV-2500KV-3-6S-Brushless-Motor-For-RC-Drone-Frame-Kit-p-1280475.html?imageAb=1&akmClientCountry=DE&cur_warehouse=CN&ID=47986

Props: https://www.amazon.de/gp/product/B08Y999LB7/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

D1 Mini NodeMcu: https://www.amazon.de/gp/product/B0754N794H/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

Buttons for the controller: https://www.amazon.de/gp/product/B08T6CKJN7/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1

ESC: https://www.amazon.de/gp/product/B09LYHCDP3/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1

18650 Zell

18650 Charger Board: https://www.amazon.de/PENGLIN-USB-Lithium-Ladeger%C3%A4t-Eigenst%C3%A4ndiger-%C3%9Cberladungs-Entladungsschutz-Integriertes/dp/B09WMRC4VP/ref=sr_1_11?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91

Print Settings

Printer:

I3 mega

Rafts:

Doesn't Matter

Supports:

Yes

Resolution:

0.3

Infill:

15%

Filament:

Grey Post-Printing =============

Glueing and sanding

After Printing the parts, you must glue both halves of the boat together. I recommend Epoxy glue for this. After that you must coat the Hull with a layer Of Epoxy Resin, to make it watertight. Don’t forget to cover the holes for the motor cables.