3D Construction Block - No Supports / Duplo Compatible

Created a semi-rounded construction block designed to be compatible with Duplos. Will be building out a collection, but starting with a few blocks. Feel free to remix. 

Print Settings:

• Standard Settings for a 0.4mm nozzle
• 2 WALL LOOPS (This is required on Bambu Lab printers. Bambu studio likes to add wall loops even when an overhang exists, and if you use more than 2 wall, it will try to print the wall in mid-air before doing the overhang. Until they fix that, use 2 wall loops for this model.)
• I used 50% infill and 0.16mm layer height. Anything 0.2mm and below for layer height should be fine.