𝓡𝓪𝓬𝓲𝓷𝓰 𝓼𝓴𝓾𝓵𝓵 - HUEFORGE

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyTerra Fossil Grey Transmission Distance: 0.3
PLA PolyTerra Cotton White Transmission Distance: 2.5

Swap Instructions:
Charcoal Black until layer #7 at 0.64mm
Fossil Grey until layer #13 at 1.12mm
Cotton White for the rest.