Optimised Ear Tip Case transport and storage (holds 6 pairs)

Got a bunch of spare ear tips kicking around you wanna keep safe?  This little case will sort you out. 

Simple yet optimised case will keep them clean, tidy and store them safely. 

 Also good as a transport case if you are a musician or switch between foam and silicone for sport or whatever. 

Quick n Easy print in pretty much any filament you wish to use

• give it enough top/bottom/perimeters or 100% infill as the walls are purposely thin as are the “pins” for the ear tips. 
• print flat side down, add a nice first layer pattern if you wish - 
• Suggest that in prusa slicer you slow the layers down under 5 - 10 seconds so that the ear tip “pins” print nice slow and clean and don't melt or deform. 

To use: 

• simply push ear tips on to “pins”.  
• Case top and bottom halves simply push together and pull apart
• (elastic band or two will hold things tight if you're going to have this bouncing around in a bag or something) 
• horizontal print layer lines should help hold it together tight enough without binding

Feel free to donate via Paypal if you appreciate this and would like to help me create more designs by keeping me in filament