trash / tool box for Prusa Enclosure | custom text and bottom

Slicer:

• The text and bottom are customizable in Prusa Slicer. (see image of the slicer) Included in the file is a modifier that adjusts infill and perimeter. In my example I used 20% honeycomb infill with 3 perimeters. (So no dust can collect in it haha)
• The text you can edit by double tapping it. You can also delete it, if you don't need the text.
• the file includes a colorchange for the bottom
• there is a version for the right and the left side. The one for the left side has some holes for screws of the enclosure frame. 

Assembly:

• I used two M3 screws each with 8mm length and a nut. I had these left over from the enclosure

Compatibility:

• MK3S+: The box can be mounted both on the right and on the left. The SD card can be pulled out
• MK4: the right box may not be usable because the USB stick might be too long

happy printing :)