Cable Grommet for Platsa Enclosures Sidewall

I was testing the Cable Grommet Shaun Doe posted. However after printing i figured out, hey the sidewall is thinner than the top and bottom ones :-D so the 22mm ones didnt fit perfectly.
So i decided to adjust to 18mm sidewalls and decided to adjust the design a bit. The cover is now inside between the inner and outside parts and it is clammed between the two if they are screwed together.
i also had trouble since i didnt had a 68mm drill just a 67 or 74mm one. So this one is a 67mm one :-)

Hope you guys enjoy it. Looking forward to get my Platsa enclosure finished soon.

Print instructions

printed in PETG white from "das filament" (german brand) in 0.2 layer height