Check valve for ventilation (125 mm)

Preview.stl - not for printing, but for rendering.

Print Settings

Printer:

Geralkom Vector 200

Rafts:

No

Supports:

No

Resolution:

0.1 -0.2

Infill:

20%

Filament:

any any

any

Notes:

I recommend printing part 1 from petg with a layer of 0.2 mm, since it is inserted into the ventilation stack with a noticeable force. It must be elastic and rigid.

I recommend printing part 2 with a layer of 0.1 because to ease the weight, I made it with a thickness of only 0.5 mm.

I recommend use ABS for it - it is lighter than PETG.

I also apply the source - for modification for other diameters

Category: Replacement Parts