Quick shade cloth brackets

I wanted to install shade cloth into my Ikea greenhouse cabinet and didn't want to spent too long printing a full bracket, so I went with corner and side brackets

Load STL into the slicer of your choice and select “Split to objects”. Ensure each object is orientated correctly with the holes and pegs facing upwards.

This design makes use of 8x4mm Neodymium magnets - 4 for the corner and 3 for the side. 

To use:

1. Place the shade cloth between the 2 halfs of the bracket you intend to use
2. Slather with glue and combine the two halves
3. Clamp together to ensure good adhesion
4. Glue in your magnets (orientation does not matter if attaching to metal)
5. Repeat 1-4 for each bracket you want to use