Bambu P1P Pegboard Screwdriver Mount

This model can hold up to 4 cylindrical screwdrivers and fits on the BambuLab Pegboard. 

The model has two holes for each screwdriver. The outer hole is 18mm in diameter and the inner hole is 13mm in diameter, acting as a stop/wall for the driver's grip/handle and keeping it aligned. 

Both STL and STEP files are provided in the files tab, as well as, a reference .3mf file for part orientation and the SolidWorks file in case you want to make any changes.

I recommend printing straight out of the .3mf file as it already contains all the print settings and part orientations to ensure print success and best quality. 

The model was printed on a BambuLab P1P with default 0.20mm STANDARD settings (except for the specified settings below), with BambuLab PLA Matte on the Textured PEI Plate. 

Print Settings:

1. Seam position: Back
2. Sparse infill density: 20%
3. Sparse infill pattern: Adaptive Cubic
4. Enable support (normal auto)
5. Brim type: No brim

Feel free to remix and share with others if you decide to print this model!