A baseball croc jibbit to fit all your needs!
27
153
2
768
updated August 14, 2023

Description

PDF

I printed my jibbit with a 0.4 mm nozzle and even after playing around with Cura's setting for a bit, I found that I could get the highest quality by toggling the “Print Thin Walls” button. From a far the laces look fine but if you get close to them, they look a little deformed. I also recommend printing with no fan to maximize the durability and bonding. I used 3D Gloop to bond the two parts together and it works great!

Tags



Model origin

The author marked this model as their own original creation.

License