Yet another Nextruder Nozzle Box

As the heading says, this is a Sim storage Box designed for Prusa Nexruder and the adapter plus three nozzles
330
557
28
13 k
updated August 16, 2023

Description

PDF

Looking for a suitable housing for the nozzles
and the adapter, didn't find anything. I found many but not all as I wanted. So I sat down and drew the box according to my needs. The specification for me was to make the case as slim as possible and it should also be flexible.
However, without the inspiration from ARegis it didn't quite work out. Thanks for that!
So I may introduce: Nextruder Nozzle Box

 

I printed it with the 0.4 nozzle and 0.2 layer height.

However, I recommend printing the lid with either a smaller nozzle or with a layer height of 0.15 (or both). It can happen that the top of the lid where the other lid is pushed in can easily crack. I haven't broken anything but you never know.

The box is designed with very little tolerance, initially you will find it very difficult to slide the lid on. After opening and closing 5 to 10 times, it becomes super smooth. 
Edit: You can also try to sand it with very fine sandpaper.

Used material:
Housing and lid: Filafarm - TruePLA Gorilla Black
Adapter box and nozzle lid: Filafarm - TruePLA Bronze Glamor
Blue Box: Filafarm - TruePLA Sun Yellow matt
Red Box: Extrudr - PLA NX2 Hellfire Red
Green Box: Exrudr - PLA NX2 Emerald Green
 

**UPDATE**

Many People ask me what Surface it is. This is a buildplate from here link . It fits perfect on the MK3s+ and MK4 and is also available for many other Printer. There you can find  another kind of the pattern wich is also beautiful

So have fun printing.

Tags



Model origin

The author marked this model as their own original creation.

License