Case for openDTU AllianceApps DTU Adapter PCB - ESP32 to NRF24L01+
Find Board here: AllianceApps DTU Adapter PCB - ESP32 zu NRF24L01+
Printed:
Printer: Prusa Mini+
Filament: Prusament PETG
Nozzle: 0.6
Profile: Prusa predefined 0.15mm Detail
Notes on the images:
For the black case the filament was very damp so the print quality is not good.
Nevertheless it fits perfectly.
Also it was printed only with 1mm walls (thin_walls_model).
The other files here are updated to 1,5mm walls.
The dark green case was printed in PLA with the 1,5mm walls.
PLA is not recommended.
The thin pins broke. With PETG that is not an issue.
The author marked this model as their own original creation.