KP3S PRO Filament Holder
holder for filament spool located on the Z-axis , for different coil widths (60,70,80,100mm)
31
254
1
1706
aktualisiert
5. September 2023
Beschreibung
PDFThe base must be screwed to the shaft with 3x M4x25 mm Allen screws. You also need 3x M4 nuts which are inserted into the shaft from the bottom.
When installing, remove the top bearing plate , insert it into the base and slide the base onto the aluminium profile from above and retighten. You may need longer screws (M5).
Tags
Herkunft des Modells
Der Autor hat dieses Modell als seine eigene Kreation gekennzeichnet.