Vesk character from Starfinder TTRPG

This is model of Grimlockar, my Vesk character from Starfinder TTRPG. Built at Heroforge.
7
63
0
311
updated August 13, 2023

Description

PDF

I can't pick right settings to print it! Using Cura, printing on Sovol SV06 with all the default out of the box setup (0.4mm nozzle, I believe). Best attempt was with these settings, as of default Sovol3D Cura's “Extra Fine” profile:

  1. Orientation: Upside down.
  2. Layer height: 0.08mm
    1. Initial layer height: 0.3
  3. Infill: 50%
  4. Print speed: 35 mm/s
  5. Enable Retraction: True
  6. Z Hop when retracted: True
  7. Generate Support: True
    1. Support Structure: Tree
    2. Support Placement: Touching Buildplate
    3. Support Overhang Angle: 50
  8. Build Plate Adhesion: Brim

Main problem: First layers of overhangs are dragged away at some point - fingers, tail tip, elbow, etc.

Tags



Model origin

The author marked this model as their own original creation.

License


Highlighted models from creator

View more