Wyze Doorbell Vinyl Siding Mount

Update: Added a wall plate with NO channel for wires. My house I and the doorbell wired come out below where I wanted. The updated one just has the hole in the middle of the plate.

Update: Added a V2 for the plug. I thickened up the center so it wouldn't be so transparent. I also shortened the sides in case your screw head were button caps instead of the chamfered head.

=======

Here is a mount for the Wyze Cam Doorbell. It can be used with the angled bracket and without.

I also mades some caps to plug the holes for the screws that screw the mount to the wall.

You can modify the model with free OnShape user here -

https://cad.onshape.com/documents/60a07e7611e968793d9973ae/w/5846d78888ddbe04c134a8a6/e/3354549c32f21649edb89adf

If you use the model above, you can add your name or address to the mount. I "suppressed" the text in the model. Just un-suppress and edit the text.

Print instructions

Print Settings

Rafts: - No
Supports: - No
Resolution: - .20
Infill: - 15%</p></div>