My version of an easy and quick to print model for stacking IKEA LACK tables.
4
22
0
141
updated August 13, 2023

Description

PDF

My version of an easy and quick to print model for stacking IKEA LACK tables (...yes, I know there is a plethora of models for that in existence already). It is rather simplistic but does not need to be fancy or pretty as it is for use in my home lab only. Each part prints within about 45 minutes (at 60 mm/s) and uses around 15 grams of PLA.

Assembly instructions:

  1. Turn the upper LACK table upside down.
  2. Mount the parts to the legs using four wood screws each, aligning the parts to the inner edges of the legs (see also pictures).
  3. Stack the upper table on top of the lower one and attach the parts from the sides by means of two wood screws per part each.

 

Print Settings

Printer:

Flying Bear Ghost 4

Rafts:

No

Supports:

No

Resolution:

0.3 mm

Infill:

20% (using 3 or 4 perimeters)

Filament:

PLA

Tags



Model origin

The author marked this model as their own original creation.

License