Car boot holders can be used inside boot or car cabin with ribons, strings etc. Velcro should be glued to the bottom of the holder.
There may be a problem tightening the screw, in which case hot air to soften the handle base and then tighten the screw immediately. However remember, be sure not to overheat the base of holder.
You need to thread string (or ribon) through the hole and tighten the screw.
Like below
The string will be fixed.
It can hold elastic Cord with Hook to.
It can be used to hold bottles, fire extinguisher, umbrella, etc.
The author marked this model as their own original creation.