Bambu Labs X1 / P1 Toolhead cover hook

I designed this removable hook to hang the toolhead cover on when performing maintenance on the bambu labs toolhead. When you want to deal with a jam or replace the hotend, the cover always seems to get in the way. Normally you flip the cover over the gantry rods, which is kinda jank and it never seems to stay in place and always flops around and gets in the way.

This hook solves all that. You put the hook on the gantry rods, then simply hang the toolhead cover on it. The cover is held securely out of the way and only takes a few seconds to remove the hook when you're done.

Default model orientation is how it is intended to be printed. Should be easy, with minimal supports required.

The P1 series printers appears to route the cover wiring on the other side of the cover so I made a version of the hook so the cover can be hung on the right side of the toolhead.

I included the Fusion 360 file, have fun. I look forward to your remixes 😃