Bambu labs p1p/p1s/x1c magnetic poop chute

When I received my Bambu Labs P1s I immediately began printing the files on the SD card. Included with the printer were bags labeled with the names of certain files on the SD card, including the phone holder and the scraper. When I printed and assembled the scraper I found that there was nowhere useful on the printer to put the scraper because none of the plastic sides were magnetic and the only place that It Could be placed was the back of the machine, Therefore, it would be very hard to reach. After printing some of the files The printer's poop was piling up, so I decided to design a poop shoot that used the magnets that came for the scraper. 

-If you are like me and you put the magnets on the scraper, you can easily peel them off with the tip of a pencil or a sharp object 

the design of the poop chute was inspired by this model on printables https://www.printables.com/model/503201-bambu-lab-p1px1x1c-magnetic-poop-chute

Print settings

-Standard Bambu Slicer settings work fine

-no supports