Bauhaus tray but ... Gridfinity

Bauhaus tray transferred to Gridfinity system size
49
116
2
868
updated August 19, 2023

Description

PDF

I do like the design of Bauhaus tray by AndrzejG, I also like the commonality of Gridfinity system, so here comes this remix of Bauhaus tray and Gridfinity.

Features:

  • 1 Unit for 42mm x 42mm x 7mm
  • - / us: stackable / unstackable
  • - / mc: single color / multi color
  • No supports needed
  • No MMU or AMS needed for multicolor design
 SizeStackableMulticolor
Trays1x1x3, 2x1x3, 2x2x3 … 4x4x3- / us- / mc
Pens_holder1x1x6, 2x1x6, 3x1x6usmc

Multicolor print hints:

  • If you downloaded the multicolor design, split the model to 2 parts using slicer software as picture shown below. I'm using bambu lab slicer, and if you're using other slicers, the process should be similar. 
  • The gap of two parts is 0.2mm, and if your printer is set correctly, maybe glue is not necessary.

 

 

我很喜欢AndrzejG 设计的 Bauhaus tray  , 我也很喜欢 Gridfinity 收纳系统,所有就有了这个融合两者的设计

特性:

  • 1 个单元的尺寸是 42mm x 42mm x 7mm
  • - / us: 可堆叠 / 不可堆叠
  • - / mc: 单色 / 多色
  • 不需要支撑
  • 多色设计不需要MMU或者AMS之类的设备

多色打印提示:

  • 如果你下载的是多色设计,在切片机里面把模型分成两片,如图所示。我用的是Bambu的软件,如果你用其他的过程应该也差不多。
  • 两个部件的间隙是0.2mm,如果你的打印机设置正确,应该不需要胶水。

Tags



Model origin

The author remixed this model.

License