tea light cover series 230812

TL;DR

Translucent Vase mode printable tea light covers for LED tea lights.

Green?

The LED tea lights i used have a yellow light, 
the prints are mostly blue, 
that ends up in green

Collection

Let there be light

Motivation

Saw some problems with vase mode printed models, brittle prints with bad layer adhesion and liked to figured out the magic behind that technic. I used a mk3s+ with 0.6 mm hardened steel nozzle for all this prints. Made the nice vase shaped model with freecad and started to print the model with different layer heights and extrusion wide. The pictures show how that effects the optical impact of the model.

Let's get started

Grab the filament you like to use, i recommend translucent PETG, start with a temperature tower to find the best temperature to archive the most shine and translucent effect.

Attribution

© yahbluez

Can I sell copies of this?

Yes! Yahbluez shared this project under the GNU GPL v3.0 license. This license allows selling copies, but you must provide proper attribution and use the GPL 3.0 license, as detailed in the GPL v3.0 license itself. You have not the right to use any other licence than GNU GPL 3.0.

Donation

If you like to donate you can use  ko-fi or paypal. 
Money will be spend on filament and beer.

Filament used

translucent rainbow PETG